27

Sep

0

comm

company news

Category

Solve everyday use electronic platform glitch .

Solve everyday use electronic platform glitch
Electronic platform with a hard shell is made of a material in the long process of using the electronic platform shell is basically no problem, but the problem is we can not see exactly where the weighbridge. We all know that the weighbridge is all internal electronic components, electronic components long-term work in harsh environments, there will be some minor problems. These problems we are not helpless. If you are not professional maintenance staff might please read on.
The following examples are engaged in low-maintenance professionals to help provide some straightforward tips, plus your hands handle electronic platform failure.
1. When you open the electronic platform, a digital display and erratic bounce.
Solution: this problem, more consideration for the junction box moisture too, should be dry with a hair dryer.
2. After boot lighter weighing results or emphasis.
Workaround: Follow the instructions for using the electronic platform re-calibration. If the problem is still not resolved the calibration is complete, it should consider the sensor has been damaged.
3. After weighing is completed, remove the load on the monitor is not zero.
Solution: The above situation should lead to line breakage signal attenuation, look carefully at the data line electronic platform is damaged and, if it should be replaced.
4. Weighing is a digital display of the instability.
Solution: Check whether the platform placed on the level, re-adjust its position.
5. Turn on the power, electronic platform displays no response.
Solution: Carefully check the power cord is in good condition, the monitor cable is intact. Damage is found to be replaced immediately. www.hcscale.com