28

Feb

0

comm

company news

Category

Cranes Emergency Treatment .

Hanging Emergency Treatment
(1) When the open electronic crane scale, digital display shows and erratic bounce.
Workaround: such questions, more thinking too much moisture to the junction box should be dry with a hair dryer.

(2) the results of boot lighter weighing perhaps focus.
The solution: use in accordance with instructions from scratch OCS calibration. Question still has not been resolved after the end of the calibration if, should reflect the sensor has been damaged.

(3) Weighing over, remove the load on the monitor is not zero.
The solution: the above line should be damaged and the signal attenuation, electronic crane carefully review the data line is not damaged and, if it should promptly replaced.

(4) is a digital weighing unstable the display.
Solution: Check crane is not placed on the level from the beginning to adjust its position.

(5) After the open power supply, electronic crane scale display without repercussions.
Solution: a closer look at the power cable is not intact, the monitor cable is not intact, can be found damaged replace immediately.